User's Manual

59
**Note – whenever out of main screen – all lasers are off and laser outputs
(including from manual operation) are disabled**
This menu allows the user to customize a par set.
The first menu item will take the user to a page that allows them to select the
output used for the par. There are four options, A, R, G, F. (Audio, Red Laser,
Green Laser, Forest Laser).
The second menu item will allow the user to a page that allows them to set
the par time.
The third menu item will take the user to a page that allows them to
customize the delay for the parset that occurs upon the pressing of the
initiation button. This feature is useful depending upon the application. For
example, as an instructor running a student through drills using a parset, you
typically want the par to start immediately when you hit the initiate button.
As an individual running yourself through drills alone, you typically want a
random delay between when you hit the button and when the drill starts.
This menu item allows for customization and personalization of this feature to
meet the user’s unique specifications.
Options are
NONE
RNDM
XXX.XX Specific Time Defined in Set Delay Page
Main Display > Settings > Set Par
Set Par Time
Par Set Menu
<< Settings
Select Output
Set Delay
A
002.50
RNDM