User's Manual

82
**Note – whenever out of main screen – all lasers are off and laser outputs
(including from manual operation) are disabled**
Allows the user to enter the menu where they can adjust shot type and
sensitivity.
The device is intended to be functional with both real firearms and with
simulated weapons such as simunition, UTM, and airsoft. However, the sound
and recoil (using the ISO devices) are very different between these different
options, so determining whether a shot occurred or not will probably require
different processing algorithms and some functions may be limited, or
reliability may be reduced, when using some simulated weapons.
Functionality with simunition, airsoft, and UTM are not intended to be a
component of the MVP firmware product.
However, the ability to adjust shot sensitivity for live fire and the ability to
adjust dead time for live fire is important for the MVP, because these impact
live fire functionality.
Select the one in use at the top. Adjust settings for each individual mode
below by scrolling down.
Alternative for the selection of the type of input (live fire/simunition/airsoft) is
to use a dropdown or selection menu where the selections are Live Fire,
Simunition, Airsoft)
Simunition
Manage Shot Type
<< Settings
Live Fire
Airsoft
Main Display > Settings > Manage Shot Type

Adjust Sound Sensitivity (1-20)
Restore Default settings
Adjust Dead Time
Live Fire
20
.016
Adjust Sound Sensitivity (1-20)
Restore Default settings
Adjust Dead Time
Simunition
20
.016
Live Fire