Workshop Manual

009W2329-R01

Designation of tools Fields of application Spare part No.

Flanging tools for nozzle holder

insert

Section C

009P2565

Torque wrench

(Stahlwille 73/6 1.5-6.5)

Generally

009P3108

Torque wrench

(Stahlwille 73/25 8-26)

Generally Section C, D,

IJ and L

009P3109

Circlip tongs (external)

A1, 10-28 mm

Circlip tongs (internal)

J2, 19-75 mm

Puller for gear wheel

(Kukko 20/10)

Generally

Puller for flexible coupling

Section R

T 41069

Compression gauge

Section C

529W0000

Adapter for compression gauge

Section C

009P3123

Part of the mentioned special tools can be manufactured without too much trouble at the

dealer´s workshopin periods outside the boat season. Therefore we have made sketches at

page B6 of each individual mounting punch with dimensions.

Slip-on ring for mounting of pistons is not illustrated but is manufactured of a worn out

cylinder liner or another piece of work pipe. Cut the cylinder liner so that you get a piece

being about 100 mm high, the turn it conical inside the liner or pipe.