Datasheet

ManualsBrandsBulgin ManualsRocker SwitchesRocker Switch SPST 16 A

TERMINAL FUNCTION ROCKER BODY PRINT, COLOUR, VOLTAGE ETC

C 5503 A L

---

tel: +44 (0)20 8979 3232 • Arcolectric • email: info@arcoswitch.co.uk

A Softline (Matt only)

P Lit window (Matt only)

ON - OFF

Lit

Unswitched neutral

5500 Lit Rocker Switches - Single Pole 16A 250Vac

ROCKERFUNCTION

Approvals & ratings vary with function

On Off Switches - ON when pressed over terminal 3

TERMINAL

5500

♦

5508 µ

for special

applications

6.3 x 0.8

4.8 x 0.8

Solder

9.1

7.0

Ø2.1

16(4)A 250Vac T85

10(3)A 250Vac T100, (12A 250Vac T125 for P rocker only)

UL CSA 15A 250Vac, CSA 16A Non Ind 250Vac

UL CSA 250Vac 1hp, 125Vac 1/2hp

UL 85˚C, file E45221, CSA file LR10990

Inrush 24A to EN61058-1 & 20A 28Vdc

contact gap

Technical data on pages 4 & 5 (switches), 66 (indicators)

For Twin units repeat the order details for both the right and left sides

9.1

12 3

ON - OFF

Lit

Switched neutral

5503

♦

preferred option

In house test

Lit

Summary of content (5 pages)

PAGE 1
5500 Lit Rocker Switches - Single Pole 16A 250Vac 16(4)A 250Vac T85 10(3)A 250Vac T100, (12A 250Vac T125 for P rocker only) UL CSA 15A 250Vac, CSA 16A Non Ind 250Vac UL CSA 250Vac 1hp, 125Vac 1/2hp UL 85˚C, file E45221, CSA file LR10990 In house test Inrush 24A to EN61058-1 & 20A 28Vdc µ contact gap Technical data on pages 4 & 5 (switches), 66 (indicators) For Twin units repeat the order details for both the right and left sides C 5503 A L --TERMINAL FUNCTION ROCKER BODY PRINT, COLOUR, VOLTAGE ETC TERMIN
PAGE 2
BODY Panel cut-out ** C5500AL --- C5503PL --- C5503A/C5430AL C5503A/C5503AL C5503P/C5503PL OPTIONS Flange Cut-outs must be punched in the direction of insertion Finish Matt is standard DIMENSIONS (mm) 28.6 Max 2.0 7.6 Colour Call factory for custom colours. A full range is available for large orders A 27.2 27.3 12.2/12.3 C5503AL --- 9.2 30.2 Matt only 13.2 Legend printing Select from the examples or call factory for custom legends 14.0 Panel thickness A,Q 0.75 to 3.3mm L,B,T 0.75 to 2.
PAGE 3
Technical Information - Switches and Fuseholders Most major technical information is shown on each specific product page, other details are grouped here for easy reference. Details shown here apply to most switches and fuseholders. Snap-action switches (pages 42, 45 and 48-51), indicators (pages 66-78) and connectors (pages 79-81) have product specific information within the section. MATERIALS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MOST PRODUCTS. .
PAGE 4
GENERAL INFORMATION ALL SWITCHES Heat and Fire resistance Category D. Ingress Protection without cover is IP40. Higher ratings where available will be shown on the relevant catalogue page. ALL PRODUCTS Solder terminals should not be fitted with “Push on”, “QD” or “Fast on” type cable connectors. Panel holes must be punched in the direction of insertion. Items marked ♦ on the following pages are assembled automatically. This ensures the highest attainable quality at a competitive price.
PAGE 5
Technical Information - Indicators The majority of Arcolectric indicator lights can be supplied with alternative light sources: Neon, Fluorescent, Filament lamp or LED. NEON and FLUORESCENT LAMPS Colours Red, Amber and Clear neon, Green fluorescent. FILAMENT LAMPS Colours Red, Amber, Green, (Clear and Blue - check availability) Maximum striking voltages Standard brightness types 65Vac 90Vdc, High brightness types 85Vac 135Vdc. High brightness types are usually fitted. LEDS Colours Red, Yellow and Green.