Installation guide

F-18
HiSpeed WAN Comm. Installation and Service Guide
x25dstat Command
Purpose
Displays HiSpeed WAN Comm. device driver statistics.
Syntax
x25dstat
Description
The x25dstat command displays the HiSpeed WAN Comm. device driver statistics. It is
similar to the ’netstat –v’ command for the other device drivers. The statistics are given for
all the configured HiSpeed WAN Comm. ports.
Display
Details about transmitted and received network and error data
Transmitted/Received Data Bytes
Specifies the total number of bytes correctly transmitted/received
Transmitted/Received Data Packets
Specifies the total number of packets correctly transmitted/received
Transmitted/Received Received-Ready Packets
Specifies the number of Received-Ready packets transmitted/received
Transmitted/Received Received-Not-Ready Packets
Specifies the number of Received-Not-Ready packets transmitted/received
Transmitted/Received Reset Packets
Specifies the number of Reset packets transmitted/received
Transmitted/Received Call Packets
Specifies the number of Call packets transmitted/received
Transmitted/Received Clear Packets
Specifies the number of Clear packets transmitted/received
Transmitted/Received Information Frames
Specifies the number of Information frames correctly transmitted/received
Transmitted/Received Received-Ready Frames
Specifies the number of RR frames correctly transmitted/received
Transmitted/Received Received-Not-Ready Frames
Specifies the number of RNR frames correctly transmitted/received
Transmitted/Received Reject Frames
Specifies the number of REJ frames correctly transmitted/received
Transmitted/Received Frame Reject Errors
Specifies the number of reject frames errors