User`s guide

Chapter 7: BIOS
7-9
Patrol Scrubbing
A memory error-correction scheme that works in the background looking for
and correcting resident errors. The options are Enabled and Disabled.
Throttling - Closed Loop/Throttling - Open Loop
Throttling improves reliability and reduces power in the processor by automatic
voltage control during processor idle states. Available options are Disabled
and Enabled. If Enabled, the following items will appear:
Hysteresis Temperature
Temperature Hysteresis is the temperature lag (in degrees Celsius) after the set DIMM
temperature threshold is reached before Closed Loop Throttling begins. The options
are Disabled, 1.5° C, 3.0° C, and 6.0° C.
Guardband Temperature
This is the temperature which applies to the DIMM temperature threshold. Each step
is in 0.5° C increment. The default is [006]. Press "+" or "-" on your keyboard to
change this value.
Inlet Temperature
This is the temperature detected at the chassis inlet. Each step is in 0.5° C increment.
The default is [070]. Press "+" or "-" on your keyboard to change this value.
Temperature Rise
This is the temperature rise to the DIMM thermal zone. Each step is in 0.5oC increment.
The default is [020]. Press "+" or "-" on your keyboard to change this value.
Air Flow
This is the air ow speed to the DIMM modules. Each step is one mm/ sec. The default
is [1500]. Press "+" or "-" on your keyboard to change this value.
Altitude
This feature denes how many meters above or below sea level the system is lo-
cated. The options are Sea Level or Below, 1~300, 301~600, 601~900, 901~1200,
1201~1500, 1501~1800, 1801~2100, 2101~2400, 2401~2700, 2701~3000.
DIMM Pitch
This is the physical space between each DIMM module. Each step is in 1/1000 of an
inch. The default is [400]. Press "+" or "-" on your keyboard to change this value.