Installation guide

User Guide
31
www.bull.com
- Select a drive with a size of the installed memory + 300
MB.
- When the installed memory exceeds 2GB due to
added memory, change the Write debugging informa-
tion to Kernel Memory Dump before you add memory.
After you add memory, the memory dump size may
change. Make sure that the drive to save the memory
dump still has enough space.
■ Windows Server 2008 32-bit (x86) Edition
- We recommend you to specify "Complete Memory
Dump" to write the debug information. If the mounted
memory size is larger than 2GB, "Complete Memory
Dump" cannot be specified; in this case, specify "Ker-
nel Memory Dump" instead.
- Select a drive with a size of the installed memory +
300MB". In case of the memory capacity is more than
2GB, select a free area of "2048+300MB" or more).
- When the installed memory exceeds 2GB due to the
added memory, change the write debugging information to
Kernel Memory Dump before you add memory. After you
add memory, the memory dump size may change. Make
sure that the drive to save the memory dump still has
enough space.
5. On the Advanced tab, in the Performance section, click Settings....
6. On the Performance Options window, click the Advanced tab.
7. In the Virtual memory section, click Change….
8. Uncheck the Automatically manage paging file size for all drives box, and check
Custom size.