Installation guide

User Guide
34
www.bull.com
Network Monitor Setup
Microsoft Network Monitor allows you to examine and troubleshoot network failures.
Note: Microsoft
®
Windows Server
®
2008 does not provide
Network Monitor. To use Network Monitor on Microsoft
®
Windows Server
®
2008, install Network Monitor by following the
steps below.
1. Download Microsoft Network Monitor at:
http://support.microsoft.com/kb/933741/en-us
2. Run the downloaded file to start the installer.
Follow the on-screen instructions to install Network Monitor.
Note: If a Security Alert appears, click Run. Select
Complete as a setup format.
Network Monitor has been installed.
Note: To remove Network Monitor, go to Programs and
Features.
Network Trace Capture
1. In the Start menu, start Microsoft Network Monitor.
2. In Start Page, select Create a new capture tab... or select New in the File menu,
and click
Capture....
A new tab for capturing a network trace is created.
3. In the Select Networks window, select a network whose trace is captured.
4. In the Capture menu, click Start to start capturing a network trace.
5. In the
Capture menu, click Stop to stop capturing a network trace.
6. In the
File menu, select Save As....
The Save As window appears. Select All captured frames from Frame selection,
and enter the names of a folder and a file.
Note: The default folder name is:
C:\Users\<User name>\Documents\Network Monitor
3\Captures
7. Click Save to create the file in the folder selected in step 6.