Installation guide

User Guide
46
www.bull.com
Installing a driver for the ATA/ATAPI Controller
An ATA/ATAPI controller driver must be installed on all BULL NovaScale series
servers, except for the T860 E1 and R480 E1.
Caution
The installation procedures vary by server model.
For the BULL NovaScale/T850 E1, BULL NovaScale R440 E1, or R460 E1
1. Start > Administrative Tools > Server Manager.
2. Diagnostics > Device Manager.
Under IDE ATA/ATAPI Controllers, right-click Intel(R) 631xESB/632xESB
SATA AHCI Controller, and click Update Driver Software.
3. Click Browse my computer for driver software.
4. Click Let me pick from a list of device drivers on my computer, and click Next.
5. Select the device driver you want to install for this hardware", select Standard
AHCI 1.0 Serial ATA Controller, and click Next.
The driver installation starts.
6. After the driver installation is complete, the message "Windows has
successfully updated your driver software" is displayed. Click Close.
7. When the message "Do you want to restart your computer now?" appears,
select Yes.
The system restarts
Note: Restart your system when prompted by a pop-up
window.
The driver update is complete.
Installing a driver for the SCSI controller
Adaptec SCSI card 29320LPE / 29320ALP
1. Start > Administrative Tools > Server Manager.
2. Diagnostics > Device Manager.
Under Storage Controllers, right-click the card to update and click Update
Driver Software.
3. Click Browse my computer for driver software.
4. Click Let me pick from a list of device drivers on my computer, and click
Next.