Manualshelf

User`s guide

ManualsBrandsBull ManualsComputer equipmentNovaScale T860 E1
191192193194195196197198199200
8-3
LAMPS
The following describes the server lamps and their indications. See Chapter 2 for the location of each lamp.
LAN ACCESS Lamp
The LAN ACCESS lamp lights green when the server is connected to a LAN. The lamp flashes while the server is
accessed through the LAN (for packet transmission). The number next to the icon indicates the network port number on
the rear panel.
STATUS Lamp
The STATUS lamp lights green when the server is operating successfully. When the STATUS lamp is unlit or
lit/flashing amber, it indicates that the server has failed.
The following table lists indications of the STATUS lamp, descriptions, and actions to take.
NOTES:
If NEC ESMPRO is installed, you can confirm the cause of a failure by referring to the
error log.
To cycle power to the server, shut down the server from the OS to and reboot it, if
available. If it cannot be shut down from the OS, reset or execute a forced shut down or
disconnect and connect the power cord to reboot the server.