User`s guide

8-32
FORCED SHUTDOWN
Use this function when an OS command does not shut down the server, the POWER/SLEEP switch does not turn off the
server, or resetting does not work.
Press and hold the POWER/SLEEP switch on the server for at least four seconds. The power is forcibly turned off. Wait
at least 10 seconds before powering on again.
IMPORTANT:
 If the remote power-on function is used, cycle the power once to load the OS, and
power off again in the normal way.
 If the processor is excessively heated, the circuit for protecting expensive components
starts. If so, the POWER/SLEEP switch cannot be used to control the power because the
system is being reset. Pull out the power cord and turn off the power. After a while,
check the operating environment (including the ambient temperature). Connect the
power cord and turn on the power. Note that it may be necessary to keep the system
powered off until the processor has cooled down (around five minutes).
Press this switch
for at least 4