User`s guide

9-4
DEVICE INSTALLATION OR REMOVAL PROCEDURE
Install or remove a component from the server as described as described in the following procedure.
Side Cover
The left side cover should be removed to access to built-in devices and/or motherboard in the server. It is not necessary
to remove the right side cover.
Removal
Remove the left side cover as described as described in the following procedure.
WARNING
Observe the following instructions to use the server safely. Failure to follow
these instructions may result in death or serious personal injury. See pages 1-3
to 1-8 for details.
Disconnect the power plug before working with the server.
1. See the section "Preparing for Installation and Removal" described earlier to prepare.
2. Loosen the two screws.
3. Slide the cover backward a little.
4. Hold the side cover securely to remove it.
Screws