User`s guide

9-54
Installation
1. See the section "Preparing for Installation and Removal" described earlier to prepare.
2. Remove the side cover.
3. Remove the two screws fixing the dummy cover.
4. Pull out the dummy cover toward you carefully.
5. Fix the rails coming with the server to the 5.25-inch device by using the four screws coming with the device.
IMPORTANT:
 Always use the screws coming with the 5.25-inch device. Using longer screws or
screws of a different diameter may cause the device to be damaged.
 Some devices have a front cover. If the cover touches the front door when it is closed,
move the rails so that the device can be pushed deeper in.
 When installing a double-height device, use the DLT device rails (larger L-shaped rails)
that come with the server.