User`s guide

9-74
3. Fix the heat sink with four screws.
NOTE: First insert the four screws in the order shown in the figure below. Then, screw
them tightly.
1
3
4
2
4. Make sure that the heat sink is aligned with the motherboard.
NOTES:
 If the heat sink is not aligned with the motherboard, remove it and install it again. The
following probably causes the heat sink not to be correctly placed:
– The CPU is not positioned correctly.
– The heat sink is not completely secured with the screws.
 Do not move the secured heat sink.
Removal
To remove the heat sink from the CPU, follow the installation procedure in the reverse order.