User`s guide

2-4
1 Front door
Open this door to access the POWER switch, 5.25-inch devices, or the optical disk drive, to
install/remove hard disk drives to the 3.5-inch (or 2.5-inch) device bays, or to connect the
USB device. You can lock the front door using the provided security key.
2 Key lock
When locked, secures the front door, preventing access to the front system controls.
3 Stabilizers (4)
Use the stabilizers to prevent the server from falling down.
4 LAN ACCESS lamp (green)
Lights green when the server is connected to the network.
The blinking pattern indicates the network activity.
Numbers printed near the lamps indicate the LAN port numbers.
5 DISK ACCESS lamp (green/amber)
Lights green while accessing the internal hard disk drive.
When one of the internal hard disk drives fails, this lamp lights in amber.
6 POWER/SLEEP lamp (green)
Lights green when the server is powered on.
Goes off when the server is powered off.
Blinks when the system is in sleep mode.
7 STATUS lamp (green/amber)
Lights green while the server is operating successfully.
If an error is detected, this lamp lights or blinks in amber.