User`s guide

E-11
Applying the "Updating the System" Process
Follow this process after the Hotfix for Windows Server 2003 (KB921411) has been applied.
NOTE: If you install the Windows CD-ROM that contains Service Pack 2 to your system,
you do not have to apply the Service pack 2 again.
1. Log on to the system using an account with administrator privileges (e.g.administrator).
2. Insert the EXPRESSBUILDER DVD into the CD-RW/DVD-ROM drive of server.
The Windows Autorun Menu will be displayed
3. Left-click on [Setup Windows], and then click [Update the system].
NOTE: You can also right-click the Autorun Menu.
Follow the on-screen messages to proceed to the application.
The [OK] dialog box is displayed.
IMPORTANT: During the "Updating the System" process, the following message may be
shown, but there is no impact to the operation.
Do not click [cancel] since it disappears after a few seconds.
4. Click [OK] to restart the system.
5. Remove the EXPRESSBUILDER DVD from the CD-RW/DVD-ROM drive immediately when the system
restarts.