User`s guide

E-15
Graphics Accelerator Driver
The standard graphics accelerator drivers that are mounted will be installed automatically. Follow the procedure below
if it is necessary to install manually.
If you want to use the optional Graphics Accelerator Driver board, follow the document attached to the board to install
the driver.
1. Insert the EXPRESSBUILDER DVD into the CD-RW/DVD-ROM drive.
2. Click the Start menu, point to [Programs], [Accessories] and click [Windows Explorer].
3. Run "setup.exe" in the following directory.
\004\win\winnt\dotnet\video\setup.exe
4. Follow the on-screen message to proceed with the installation.
If the dialog message "Digital Signature could not been found." appears, select [Yes] to continue.
5. Remove the EXPRESSBUILDER DVD from the CD-RW/DVD-ROM drive, follow the on-screen
instructions and restart the system.
Installing a SCSI Controller Driver
When using a SCSI controller driver, update your system with the EXPRESSBUILDER DVD attached to your system.
The SCSI controller driver will be installed automatically.
Installing the Disk Array Controller Driver (LSILOGIC MEGARAID SAS 8480E)
The Disk Array Controller driver will be installed automatically.
Installing the SAS Controller Driver (LSISAS3443E-R)
When using the SAS controller driver (LSISAS3443E-R), update your system with the EXPRESSBUILDER DVD
attached to your system.
The SAS controller driver will be installed automatically.