User`s guide

2-18
Remote Management
The server may be monitored and managed via LAN/WAN using the EXPRESSSCOPE Engine 2 and the NEC
DianaScope utilities stored in the EXPRESSBUILDER DVD.
The EXPRESSSCOPE Engine 2 provides the following features:
 Monitoring of temperature, voltage, fans, and electric power status
 Monitoring of the power supply unit
 Monitoring of the hard disk drives
 Generation of a SEL (system event log) at occurrence of hardware failure
 Monitoring of the system management watchdog timer
 Monitoring of the periodic SMI timer
 Remote management by using a Web browser (e.g., resetting the server, power on/off, viewing the System
Event Log (SEL))
 Remote KVM and remote device features (An optional remote management license is required.)
 Remote management via LAN/WAN using NEC DianaScope and centralized management of several systems
For more information about remote management using Web browser, remote KVM feature, and remote device feature,
refer to the "EXPRESSSCOPE Engine 2 User's Guide" stored in the EXPRESSBUILDER DVD.
NOTE: To use the Remote Management Extended License, refer to our Web site to see the
latest information about remote console/remote media feature.