User`s guide

4-13
BMC LAN Configuration Submenu
Option Parameter Description Your Setting
IP Address [192.168.001.001]
Specifies an IP address for the
management LAN.
IP Subnet Mask [255.255.255.000]
Specifies a subnet mask for the
management LAN.
Default Gateway [000.000.000.000]
Specify a default gateway for the
management LAN.
DHCP [Disabled]
Enabled
Set this item to [Enabled] to obtain an
IP address from DHCP server
automatically.
If you intend to specify an IP address
manually, set this item to [Disabled].
Web Interface – –
HTTP [Disabled]
Enabled
Set this item to [Enabled] to use the
HTTP communication for the Web
interface.
HTTP Port
Number
[80]
Specifies the TCP port number which
the management LAN uses for the
HTTP communication.
HTTPS [Disabled]
Enabled
Set this item to [Enabled] to use
HTTPS communication for the Web
interface.
HTTPS Port
Number
[443]
Specifies the TCP port number which
the management LAN uses for
HTTPS communication.
Command Line
Interface
– –
Telnet [Disabled]
Enabled
Set this item to [Enabled] to use
Telnet communication as a command
line interface.
Telnet Port
Number
[23]
Specifies the TCP port number to be
used for Telnet communication.
SSH [Disabled]
Enabled
Set this item to [Enabled] to use SSH
communication as a command line
interface.
SSH Port Number [22]
Specifies the TCP port number to be
used for SSH communication.
Clear BMC
Configuration
[Enter]
Press Enter and select "Yes" to
initialize the BMC configuration.
[ ]: Factory-set
IMPORTANT: Notes on performing a Clear BMC Configuration
 Executing "Load Setup Defaults" in the BIOS SETUP utility does not restore the default
value for the settings related to the management LAN of the BMC. To restore the
default value, you need to execute a Clear BMC Configuration.
 It may take several minutes until the initialization completes after the execution of a
Clear BMC Configuration.
 Executing a Clear BMC Configuration also clears the settings made in NEC
DianaScope. Before execution, be sure to make a backup copy of the settings
information of NEC DianaScope.
NOTE: Executing [Save Custom Defaults/Load Custom Defaults] of BIOS SETUP does
not save the settings you have made in the BMC LAN Configuration menu.