Installation guide

SYSTEM FEATURES
SYSTEM COMPONENTS
TECHNICAL ASSISTANCE
Should you need help. First check our website at www.bulldogsecurity.com/wires.htm or call our toll-free
Tech Support Hotline Monday through Friday 9AM-8PM and Saturday 10AM-4PM EST at 800-878-8007.
You must give the following information:
•Name
•Telephone Number with Area Code (Fax number if applicable)
•Year, Make, and Model of the vehicle
•The model number of the system you are installing
•The type of assistance you are requesting
If you give the above information you will be called back as soon as possible, usually within 10 minutes.
BEFORE YOU BEGIN
1
REQUIRED TOOLS
Congratulations, you have purchased one of the most advanced remote starter systems ever made. Your new remote
starter is a technological breakthrough utilizing the most advanced, state of the art technology and components.
It is computer controlled and manufactured in the U.S.A. The dependability and variety of features make Bulldog
Security the leader in the industry. Enjoy your new remote starter for years to come!
This remote system is designed to start your vehicle by sending a command signal from the remote transmitter.
It is required that your installation is done in a well-ventilated area. It is the responsibility of the
owner to ensure that the remote system is not used to start the vehicle in an undesired location.
It is recommended that a carbon monoxide detector be installed in the living area near a location where the
vehicle may be garaged.
Four-Button Extended Range Remotely start your car to run the heater or air conditioning from an extended distance.
Remote Control
Instant Panic Works as personal protection. The horn sounds and the lights flash for 30 seconds.
Car Finder The horn will sound and the lights will flash to help you locate your vehicle in a crowded parking lot.
Remote Programmable Run Time Remotely program your vehicle to run 5 to 15 minutes.
Run Time Confirmation Lets you check the run time that the unit is programmed for.
Tach/Tachless Option A programmable feature that lets you choose from the easy to install tachless operation or the standard wire-in, tach
operation.
Parking Light Confirmation Confirms that your vehicle has received a remote signal and will remain on if the engine is remotely started.
Automatic Hot and Cold Start Remotely program your car to start at a preset temperature. Automatically starts your car in extreme temperatures.
Pit Stop Mode Allows you to exit the vehicle while the engine remains running.
Extended Range Antenna Allows you to operate your system from up to 400 feet away. (800 feet for E Models)
Code Learning Allows your remote starter to learn new remotes, should you want to add remotes, or if remotes are lost.
Limited Lifetime Warranty Guarantees life-long protection.
Your system includes:
1-Installation & Operation Guide
1-Main Control Module
1-Four Button Remote Transmitter with Slide Protector
1-(4) Relay Harness with Relays
1-12-Pin Wire Harness
1-Hood Pin Switch
1-Extended Range Antenna (E Model Only)
2-Window Clips (E Model Only)
1-Warranty
1-Warning Sticker for Under the Hood
2-Bulldog Window Decals
You will need a computer-friendly test light and a 5/16 drill bit when moubting the hood pin switch. In
most cases no additional tools are required, however if the bottom of your dash on the driver’s side will
come off you must remove it. In this case a screwdriver or socket set may be needed.