Installation guide

8 21
MAKING CONNECTIONS cont.
4. Use electrical tape to wrap, be sure to cover about 2
inches on either side of connection. Secure with wire ties
as shown.
3. Lay upper twisted pair of wires over right wire as shown.
Bring lower twisted pair of wires up to meet the left
wire as shown.
2. Twist upper wires together, twist lower wires together
as shown.
1. When tying two separate wires together at their ends,
strip back one inch of insulation on both wires and
separate the strands of wire as shown below.
Use this method ONLY when connecting two separate wires end
to end.
MAKING END TO END CONNECTIONS
FOLLOW THESE INSTRUCTIONS
Wire Tie
Electrical Tape
Wire Tie
VEHICLES WITH FACTORY
ANTI-THEFT SYSTEMS
Manufacturer Make/ Year Anti-theft
Acura TL 99+ TRANSPONDER
CL 98+ TRANSPONDER
RL 99+ TRANSPONDER
INTEGRA 00 + TRANSPONDER
NSX TRANSPONDER
AUDI A4 00+ TRANSPONDER
A6 00+ TRANSPONDER
A8 98+ TRANSPONDER
BMW ALL 97+ TRANSPONDER
BUICK CENTURY 97+ VATS
LESABRE 90-96, 2000 VATS
PARK AVE 91-96 VATS
PARK AVE 97+ TRANSPONDER
REGAL 93-96 VATS (Some)
RIVIERA 93-99 VATS (Some)
ROADMASTER 93-96 VATS
SKYLARK 96-98 PASSLOCK 1
CADILLAC ALLANTE 91-93 VATS
BROUGHAM 90-96 VATS
CATERA 98+ TRANSPONDER
DEVILLE 92-96 VATS
DEVILLE 99+ TRANSPONDER
ELDORADO 89-98 VATS
ELDORADO 99+ VATS
ESCALADE 99+ PASSLOCK 2
FLEETWOOD 90-96 VATS
SEVILLE 90-98 VATS
SEVILLE 99+ TRANSPONDER
SLS/ STS 97+ TRANSPONDER
CHEVROLET ASTRO 98+ PASSLOCK 2
BLAZER 98+ PASSLOCK 2
CAMARO 86+ VATS
CAVALIER 95-99 PASSLOCK 1
CAVALIER 2000+ PASSLOCK 2
CORVETTE 88+ VATS
EXPRESS 98+ PASSLOCK 2
IMPALA 2000+ PASSLOCK 2
LUMINA 96+ VATS