Installation manual

. .
29
PROGRAMMING
6 + 3 Hour Time 2 Hour Time
Start Start
7
+ The Vehicle The Vehicle has Built-in Turbo Built-in Turbo
without Turbo aftermarket Turbo Timer Control is Timer Control is
(The system timer installed. Active. Press Active: Press
cannot be The system
+ buttons at + buttons at
Arm with the can be Arm with the same time the same time to
engine is engine running to control control Engine
running. and the shock engine running running three
sensor will be by- one minute. minutes.
pass as long as
the engine is
running.
Five chirps=Built-in Turbo Timer Control is Active/Press
and buttons at the same time to control Engine
runningfive minutes.
START FEATURE CHART #2
One Chirp with
Press One LED Pulse
Transmitter Factory Default Two Chirps with
Three Chirps with Four Chirps with
Button Setting Two LED Pulses
Three LED Pulses Four LED Pulses
1 Exit the programming mode. (3 long chirps and 3 parking light flashes
to confirm this exit.)
2
+ Engine Checking Engine Checking Engine Checking Engine Checking
Voltage TACH / RPM Negative Oil Positive Oil
Learning Mode Sensor Sensor
3
Start Timer: 0.8-second (2 chirps), 1.0-second (3 chirps) 1.2-second
0.6-second (4 chirps), 1.4-second (5 chirps), 1.6-second (6 chirps),
1.8-second (7 chirps), 2.0-second (8 chirps), 3.0-
second (9 chirps), 4.0-second (10 chirps.
4
Low check level Hi check level
5 + Start or stop the system for TESTING AND ADJUSTMENT