Model #213 Model #209 USER GUIDE Read Before Use! Do not use on High Pressure Laminate or Solid Wood www.BulletTools.com • USA 1-800-406-8998 • Int’l 1-208-772-0175 1 PRT-INS-0213 RevB.2.3.
WARNING: FAILURE TO FOLLOW THESE RULES MAY RESULT IN SERIOUS INJURY! USING THIS MACHINE WITH RESPECT AND CAUTION WILL CONSIDERABLY LESSEN THE POSSIBILITY OF PERSONAL INJURY. SAFETY RULES FOR THE EZ SHEAR™ SST 1 ������� READ AND UNDERSTAND THIS INSTRUCTION MANUAL BEFORE OPERATING THE EZ SHEAR™. 2 ������� If you are not thoroughly familiar with the operation of the EZ Shear™, obtain advice from a qualified instructor or call 800-406-8998 (Intl.: 208-772-0175). 3 ������� Stay alert.
in the box Welcome! Your EZ Shear™ comes ready to easily assemble*.
Set Up 1 Attach table to power assembly using (3) #10 x 3/4” Phillips head screws with a #2 screwdriver. #10 x 3/4” Align rails with table. Make sure that rail edge rests in the rail channel. 2a Rail Channel 2b Insert (4) #12 x 4 Phillips head screws through base (power assembly) and tighten with a #3 screwdriver.
Set Up 3 Attach rail to table using (4) #12 x 1” Phillips head screws and tighten with a #3 screwdriver. #12 x 1” 4 Fasten the Rail Support Tabs to the Base with two (2) M6 x 8mm Phillips head machine screws. M6 x 8 5 Tightly secure the handle to the camshaft using four (4) M8 x 20mm sockethead machine screws with an M6 Allen wrench. (Included) M8 x 20 6 To attach extension, push spring-button and slide handle stub into lower handle until the spring-button clicks into place.
MAKING CUTS Caution! Wear hand and eye protection while operating the EZ Shear™ 1 While gently pushing handle down, pull safety lock in, then lift handle. 2 Pull Safety Lock Place product on table. Bring handle down until blade touches material. Warning! Blade is very sharp. Keep fingers away from blade. 3 Push the handle down until the material is completely cut. KEEP 4 The safety lock can be positioned to automatically reset. You must pull safety lock each time you make a cut.
Your EZ Shear SST cuts a wide variety of products. Please refer to this cut guide for recommended products and thicknesses.
WARRANTY 90 Day Satisfaction Guarantee – Bullet Tools is confident that you will be absolutely pleased with the purchase of our product. If, for any reason, you should not be completely satisfied with your EZ Shear, we will refund your purchase price at anytime within 90 days of your original purchase (receipt required).