Manualshelf

Use and Care Manual

ManualsBrandsBullet Tools ManualsKitchen26 in. Shear Siding Cutter
12
Quick Start Guide
for EZ Shear Model #220
for EZ Shear Model #226
A. (4) M6 x 65mm PH Phillips Machine Screws
B. (4) M6 Star Washers
C. (6) M6 x 25mm PH Phillips Machine Screws
1. Power Assembly
1a. Safety Lock pin
2. Handle Assembly
3. Fence
4. Table
The Hardware Kit is used in multiple models. Your Shear may not use all of the items listed.
5. Tail
6. Rails x 2
7. Hone Stone
8. Mounting Brackets x 4
9. Hardware Kit
D. (5) M6 x 16mm FH Phillips Machine Screws
E. (4) #10 x 1 FH Phillips Self Tapping Screws
F. (2) M8 x 50mm Hex Bolts
G. (2) M6 Wing Nuts
In the Box: In the Hardware Kit:
A. (8) M6 x 65mm PH Phillips Machine Screws
B. (8) M6 Star Washers
C. (8) M6 x 25mm PH Phillips Machine Screws
1. Power Assembly
1a. Safety Lock pin
2. Handle Assembly
3. Fence
4. Table
The Hardware Kit is used in multiple models. Your Shear may not use all of the items listed.
5. Tail
6. Rails x 4
7. Hone Stone
8. Mounting Brackets x 4
9. Hardware Kit
D. (6) M6 x 16mm FH Phillips Machine Screws
E. (4) #10 x 1 FH Phillips Self Tapping Screws
F. (2) M8 x 50mm Hex Bolts
G. (1) M6 Allen Wrench
In the Box: In the Hardware Kit:
Tools needed: #2 & #3 Phillips head screwdrivers and a 1/2” (13mm) socket or wrench.
IMPORTANT! Start all screws BY HAND when assembling your shear. This will help avoid cross-threading.
ASSEMBLING YOUR SHEAR
1. ATTACH RAILS
Attach rails and mounting brackets to Power
Assembly base using Item A machine screws, fitted
with Item B star washers.
2. ATTACH TAIL
Attach tail and mounting brackets to rails using
Item C machine screws. Make sure holes in tail are
facing up.
1
3. ATTACH TABLE
A. Attach table to base starting
with front, start screws by
hand, use Item D screws.
B. Attach back of table to tail
using Item E self tapping screws.
Tighten with #2 Phillips.
3
3B
3A
Tail
2

Summary of content (2 pages)