Use and Care Manual

CUT GUIDE
Maximum Thickness 520 = 7/16”
Maximum Thickness 526 = 1”
Carpet Tile
Luxury Vinyl Tile
Commercial Vinyl Tile
VCT
Parquet
PVC Tile
Rubber Tile
Soft Plastic
For manuals, registration,
warranty info, accessories,
& tips on using and
maintaining your
Magnum Shear, go to
BulletTools.com
or scan the QR code ->
PRT-INS-QRCT REV.A.6.15 ©2015 Bullet Tools
Hayden, ID USA • 208-772-0175
SET UP
MAKING CUTS
3. ATTACH TABLE
A. Attach front of table to base,
using Item D screws. Tighten
with #3 Phillips.
B. Attach back of table to tail using
Item E self tapping screws.
Tighten with #2 Phillips.
3
4
3B
3A
Item E
Item F
Tail
Item G
5
4. TO ATTACH HANDLE:
Insert Item F bolts and tighten with 1/2”
(13mm) wrench.
5. ATTACH ANGLE GUIDE
Install angle guide and tighten Item G
thumbscrew.
While gently pushing
handle down, pull Safety
Lock pin out, lift handle.
Pull Safety Lock pin
1
HANDLE UNDER
EXTREME PRESSURE
DO NOT ALLOW TO
SLAM BACK!
Place product on table.
Bring handle down until
blade touches material.
Push the handle down until
the material is completely cut.
3
2