Instructions / Assembly

10
Your MAGNUM
™
Flooring Shear cuts a wide variety
of products. Please refer to this cut guide for
recommended products and thicknesses.
Please note: Approved materials may vary
in density and hardness. If extreme pressure
is required to cut a product, it may result in
damage to your machine. Please contact Bullet
Tools before proceeding. Warranty is void if an
unapproved product damages the machine.
MAGNUM
™
Flooring Shear
CUT GUIDE
Maximum Thickness = 25mm or 1”
Material
Laminate Flooring
Commercial Vinyl
Luxury Vinyl Tile
Parquet
PVC Tile
Rubber Cove Base
Rubber Tile
Soft Plastic
Siding, Fiber Cement Board
Siding, Pressboard Lap
Siding, Vinyl
Siding, Wood
Trim, OSB
Trim, Fiber Cement
Trim, Vinyl
Shingles, Tar or Wood
0 500 1000 1500
Janka Hardness Scale
Note: Due to extreme variations in wood density, your shear may or may not cut the products listed below
Recommended hardness cut limit on
Engineered Wood flooring
with the EZ Shear
™
1250
Recommended hardness cut limit on
Engineered Wood flooring
with the Magnum Shear
™
1400
Recommended hardness cut limit on
Solid Wood flooring
with the Magnum Shear
™
1250
Pecan
Bolivian Rosewood
African Cherry
(some) Bamboo
African Walnut
Sappelle
Brazilian Maple
Hard Maple
Royal Mahogany
Caribbean Walnut
Australian Cypress
White Oak
Vintage Oak
White Ash
American Beech
Northern Red Oak
Yellow Birch
Caribbean Heart Pine
Heart Pine
Larch
Teak
Brazilian Eucalyptus
Peruvian Walnut
Black Walnut
American Cherry
Southern Yellow Pine
S. A. Lacewood
African Mahogany
Mahogany
Honduran Mahogany
California Redwood
H igh P ressure
Laminate Flooring
OR
Engineered Wood with a
veneer thicker than 1/16”
with the EZ Shear™
DO NOT CUT