Use and Care Guide

1. ...... READ AND UNDERSTAND THIS INSTRUCTION MANUAL BEFORE
OPERATING THE MAGNUM SHEAR™.
2. ......If you are not thoroughly familiar with the operation of the Magnum Shear™, obtain
advice from a qualified instructor or call 800-406-8998 (International: 208-772-0175).
3. ......Stay alert. Do not operate while under the influence of drugs, alcohol, or medication.
4. ......Always wear safety approved eye protection with side shields (ANSI Z87.1).
5. ......Keep work area clean and free of debris.
6. ......Keep children and unauthorized persons away from Magnum Shear™ and work area.
7. ......Make sure tool is secure. Operate only on a firm substrate or solid stand.
8. ......Use the right tool. Do not force the Magnum Shear™ or use it for a job for which it was
not designed; use only on approved materials (see list on p. 9).
9. ......Keep Blade sharp. A dull Blade will not perform properly.
10.......Always keep hands away from Blade while operating or carrying.
11.......Do not alter or misuse this tool. The Magnum Shear™ is precision built; modifications
not specified in this manual may result in a dangerous condition.
12.......Maintain Magnum Shear™ with care. Keep Blade sharp and clean. Follow instructions
for lubricating and changing accessories.
13.......Use only recommended accessories. The use of improper accessories may cause
hazards or injury.
14.......Never leave the Magnum Shear™ unattended. Secure the Handle with the Safety Lock
when not in use (see p. 4).
15.......Warning: The dust generated by cutting certain wood, wood fiber and/or PVC
products can be injurious to your health (but since the Magnum Shear™ doesn’t
create any dust, we suggest that you don’t eat the small chips sometimes created
when cutting).
2
SAFETY RULES FOR THE MAGNUM SHEAR™