Use and Care Guide

SET UP
ATTACH
ATTACH
ASSEMBLY
3
Welcome! Your Magnum Shear™ comes ready to easily assemble*.
part A. (4) 8mm x 60mm PH Phillips machine screws
part B. (
4) M8 star washers
part C. ( 4) 8mm x 25mm PH Phillips machine screws
part D. (6) 6mm x 16mm PH Phillips machine screws
part E. (
5) #12 x 1 PH Phillips tapping screws
1. Power Assembly
2. Handle Assembly
3. Fence
4. Table
5. Tail
6. Rails (2)
7. Instruction Manual
8. Hone Stone
9. 10mm Hex Wrench
10. Hardware Kit containing
rails to power assembly
using (4) 8mm x 60mm
PH Phillips machine screws
fitted with M8 star washers.
(Hardware Kit part A. & B.)
tail to rails using (4) 8mm
x 25mm PH Phillips
machine screws
(Hardware Kit part C.).
Make sure holes in tail are
facing up.
*Note: You will need #2 & #3 Phillips head screwdrivers Please Review Parts Included in Box:
M16 x 40 BHCS
A. M8 x 60 PHP
6. Rails
5. Tail
4. Table
E. #12 x 1 PHP
C. M8 x 25 PHP
D. M6 x 16 PHP
D. M6 x 16 PHP
Blade
Back Stroke Stop
D. M6 x 16 PHP
1. Power Assembly
2. Handle Assembly
3. Fence
B. M8 Star Washer
1A
1B
1C
power assembly
(sticker side)
rail rests against
power assembly
tighten screws with screwdriver
these holes face up
8. Hone Stone
9. 10mm Hex Wrench