Operating Guide

Gently push handle down, pull

Safety Lock pin out, lift handle.

Insert handle into handle base

until lock button clicks.

Pull Safety Lock pin

Model #009

PROUDLY MADE IN THE USA

QUICK START GUIDE

Gently push handle down, pull

Safety Lock pin out, lift handle.

Insert handle into handle base

until lock button clicks.

Pull Safety Lock pin

Model #009

PROUDLY MADE IN THE USA

QUICK START GUIDE

PAGE 1
QUICK START GUIDE Model #009 1 Insert handle into handle base until lock button clicks. 2 Gently push handle down, pull Safety Lock pin out, lift handle. Pull Safety Lock pin PROUDLY MADE IN THE USA QUICK START GUIDE Model #009 1 Insert handle into handle base until lock button clicks. 2 Gently push handle down, pull Safety Lock pin out, lift handle.
PAGE 2
3 Place product on table. Bring handle down until blade touches material. 4 Push the handle down until the material is completely cut. For warranty information & cut guide, visit BulletTools.com 3 Place product on table. Bring handle down until blade touches material. For warranty information & cut guide, visit BulletTools.com PRT-INS-F009 Rev.A.2.15 ©2015 Bullet Tools 4 Push the handle down until the material is completely cut. PRT-INS-F009 Rev.A.2.