Owner`s manual

JetPaks

™

Interchanging JetPaks

Step 1: Put the spa in Standby mode, this will prevent

the pump(s) from activating (see Control System).

Step 2: Carefully, remove the head rest by

lifting upwards.

Step 3: Push the JetPak

™

forward until you have enough

room to reach the two PVC water unions and

air-line union.

Step 4: Loosen the two PVC unions, pull the manifold

out from in between the two water unions and remove

the JetPak from the JetPod

™

Operation

Step 5: Disconnect the air line union.