Owner`s manual

Operation

Step 6: Exchange JetPaks

™

Step 7: Reattach the JetPaks by reversing steps 1-5.

IMPORTANT: Spa models with two pumps have two

different JetZones

™

. These JetZones are divided by a

JetZone Divider

™

. Never operate the spa without the

JetZone divider in place. Doing so will cause serious

damage to the pumps. In addition, interchanging

JetPaks

™

from one JetZone to another may result in

improper water ow to one or more JetPaks. Do not

install the JetZone Divider in either the rst or the last

seat. If you have questions or problems, see the

JetZones section or contact your authorized Bullfrog

Spa dealer.

NOTE: The NeckBlaster

™

JetPak (J4) will only t in the

Lounger or Recliner (corner seats). Due to its large

amounts of plumbing and jets, the NeckBlaster will not

t in a Bucket (middle or wall seat).