Owner`s manual

33
Operation
JetZones
™
Spas powered by two pumps provide a unique feature
called JetZones. A JetZone
™
is a region of jets powered
by the same pump. With JetZones, you decide which
JetPaks
™
are powered by each pump. Two-pump spas
have two JetZones.
Each pump (on two-pump models only) provides
water ow to its own JetZone. Each JetZone can be
customized with the use of a JetZone Divider
™
(included).
By simply moving the JetZone Divider, you can
increase or decrease the number of JetPaks that are
powered by a particular pump, thus creating a new
JetZone. By adding JetPaks to a particular JetZone, you
will decrease the power to that zone. By removing
JetPaks from a particular zone, you will increase the
power to that zone. To Create a New JetZone:
Step 1: Remove the JetPaks by following steps 1-5 in
Interchanging JetPaks of the JetPak section.
Step 2: Loosen the two PVC unions, pull the manifold
out from the two water unions and remove the JetPak
from the JetPod
™
.
Step 3: Remove the JetZone Divider and reinstall the
divider in a location of your choice (never install in
either the rst or the last seat).
Step 4: Reattach the JetPaks by reversing the JetPak
removal procedure.
WARNING: Never operate the spa without the
JetZone Divider in place or by installing the JetZone
Divider in the rst or the last seat. Doing so may cause
serious damage to the pumps.