Owner`s manual

Filter Cleaning

It is recommended that the lter cartridge(s) be

cleaned every 3-6 weeks or as needed. Replace the

lter cartridge(s) every 1-2 years or when necessary.

To maintain warranty protection, use only genuine

Bullfrog Filter Cartridge replacements. To clean your

lter cartridge(s), complete the following:

Step 1: Place the spa in Standby mode.

Step 2: Remove FilterCap

™

Step 3: Remove cartridge(s).

Step 4: Using a garden hose with a nozzle or other

high-pressure device, clean cartridge(s). Work top to

bottom on each pleat.

• To remove collected suntan lotions or body oils, soak

cartridge(s) in warm water with a Filter Cleaner or

detergent.

• To remove calcium deposits, soak cartridge(s) in a

plastic container using a 1:10 ratio of Muriatic acid to

water solution. Calcium deposits indicate a high spa

pH, which should be corrected.

Step 5: Reinstall cartridge(s) and FilterCap.

Step 6: Press any button to reset the control system.

To ease the burden of cleaning a lter cartridge,

consider Bullfrog’s SpinClean

™

lter cleaning device

(see JetPaks and Accessories or contact your

authorized Bullfrog Spa dealer).

IMPORTANT: Using a brush to clean a lter cartridge

could cause damage to the cartridge.

Maintenance