Owner`s manual

Temperature not yet known. This is normal within the first few minutes of the spa
power up.
The spa is operating in Standard mode.
Temperature display is current after pump has been
running for at least 2 minutes. Press TEMP followed
by LIGHT to switch modes.
The spa is operating in Economy mode.
Ecn will appear solid on the display when the
temperature is not current. Ecn will alternate with the
temperature when the temperature is current. Press
TEMP followed by LIGHT to switch modes.
The spa is operating Standard-in-Economy mode. Operates the same as Standard mode however, it
will revert to Economy mode after 1 hour. Press
TEMP followed by LIGHT to switch directly to
Economy mode.
The spa is in Sleep mode. Press TEMP followed by LIGHT to switch modes.
The spa is in Standby mode. Press any button to exit mode and return to normal
operation.
pH is low. Add pH increaser per manufacturer’s instructions.
ph is high. Add pH decreaser per manufacturer’s instructions.
Sanitizer is low. Add sanitizer per manufacturer’s instructions.
Sanitizer is high. Remove spa cover and allow sanitizer to dissipate.
Periodic Reminder Messages (Press MODE to reset a displayed reminder)
Every 7 days Test and adjust chemical levels per manufacturer’s
instructions.
Every 7 days Test and adjust chemical levels per manufacturer’s
instructions.
Every 30 days Remove, clean, and reinstall filter per manufacturer’s
instructions.
Every 30 days Test and reset GFCI per manufacturer’s instructions.
Every 90 days Drain and refill spa per manufacturer’s instructions.
Every 180 days Clean and condition cover per manufacturer’s
instructions.
Every 180 days Clean and condition cabinet per manufacturer’s
instructions.
Every 365 days
Install new filter.
Warning! Shock Hazard! No User Serviceable Parts.
Do not attempt service of this control system. Contact your authorized dealer or service organization for assistance. Follow
all Owners’ Manual power connection instructions. Installation must be performed by a licensed Electrician and all
grounding connections must be properly installed.
Bullfrog Spas Owner’s Manual
14