Owner`s manual

CLEANING FILTER

It is recommended that the filter cartridge(s) be cleaned every 3 to 6 weeks or as needed. Replace the

filter cartridge(s) every 2 years or when necessary. To maintain warranty protection, use only Bullfrog

Filter Cartridge replacements.

1. Place the spa in Standby mode.

2. Remove skimmer faceplate and basket.

3. Remove cartridge(s).

4. Using a garden hose with a nozzle or other high-

pressure device, clean cartridge(s). Work top to bottom

on each plate.

a. To remove collected suntan lotions and body oils

soak cartridge(s) in warm water with Filter Cleaner

or detergent.

b. To remove calcium deposits, soak cartridge(s) in a

plastic container using one part muriatic acid to ten

parts water solution. Calcium deposits indicate a

high spa pH, which should be corrected.

5. Reinstall cartridge(s), basket, and skimmer faceplate.

6. Press any button to reset the control system.

Important: Using a brush to clean a cartridge could cause

damage. Bullfrog’s SpinClean™ filter cartridge cleaners

may be used and can be obtained from your authorized

Bullfrog Portable Spa dealer.

Bullfrog Spas Owner’s Manual