Troubleshooting guide

12
Once the system has exited Priming Mode, the top-side panel will display
the Main Screen, but the display will not show the temperature yet, as shown
below. is is because the system requires approximately 1 minute of water
owing through the heater to determine the water temperature and display it.
– – –°F– – –°C
The Main Screen
Set: 104°F
8:32 PM
Ozone
Filter 1
Spa
Hold
Settings
High Range
102°F
Ready in Rest Mode
Heating
Spa Status
Important information about spa operation can be seen quickly from the Main Screen.
The most important features, including Set Temperature adjustment, can be accessed from this screen.
The actual water temperature can be seen in large text and the desired, or Set Temperature, can be selected and adjusted.
Time-of-day, Ozone operation and Filter Operation status is available, along with other messages and alerts.
High Temperature Range vs. Low Temperature Range is indicated in the upper right corner.
The Jets Icon in the center will spin on if any pump is running and changes color when the heater is on.
A Lock icon is visible if the panel or settings are locked.
The Menu choices on the right can be selected and the screen will change to show more detailed controls or programming
functions.
Water Temperature
Messages
Desired Temperature
Temperature Range
Pump and Heat
Menus
Lock Indicator
Status
Spa Status
Important information about spa operation can be seen quickly from the Main
Screen. e most important features, including Set Temperature adjustment,
can be accessed from this screen. e actual water temperature can be seen in
large text and the desired, or Set Temperature, can be selected and adjusted.
Time-of-day, Ozone operation and Filter Operation status is available, along
with other messages and alerts. High temperature Range vs. Low temperature
Range is indicated in the upper right corner. e Jets Icon in the center will
spin on if any pump is running and changes color when the heater is on. A
Lock icon is visible if the panel or setting is locked.
e Menu choices on the right can be selected and the screen will change to
show more detailed controls or programming functions.
The Main Screen