Troubleshooting guide

13
Navigation
Navigating the entire menu structure is done with the 5 buttons on the control
panel. When a text item changes to white during navigation, that indicates the
item is selected for action. Operating or changing a selected item is generally
done with the center or “Select” button. e only item that can be changed on
the left side of the Main Screen is the Set Temperature. Press the Left Arrow
button to change the Set Temperature number to white. e Set Temperature
can then be adjusted with the up and down buttons. Pressing the Select button
or the Right Arrow button will save the new set temperature.
On the right side of the screen, the menu selections can be selected with the
Up and Down Buttons. Use the Select Button to choose an item. Selecting
one of these items will change to a dierent screen with additional controls.
The Main Screen
Navigation
Navigating the entire menu structure is done with the 5 buttons on the control panel.
When a text item changes to white during navigation, that indicates the item is selected for action.
Operating or changing a selected item is generally done with the center or “Select” button.
The only item that can be changed on the left side of the Main Screen is the Set Temperature. Press the Left Arrow button
to change the Set Temperature number to white. The Set Temperature can then be adjusted with the up and down buttons.
Pressing the Select button or the Right Arrow button will save the new set temperature.
On the right side of the screen, the menu selections can be selected with the Up and Down Buttons. Use the Select Button
to choose an item. Selecting one of these items will change to a different screen with additional controls.
Set: 104°F
8:
Ozone
Filter 1
Spa
Hold
Settings
High Range
102°F
Ready in Rest Mode
Heating
Messages
At the bottom of the screen, messages may appear at various times. Some of these messages must be dismissed by the user
(see page 17).
Press-and-Hold
If an Up or Down button is pressed and held when the Set Temperature is selected, the temperature will continue to change
until the button is released, or the Temperature Range limits are reached.
Messages
At the bottom of the screen, messages may appear at various times. Some of
the messages must be dismissed by the user (see page 12)
Press-and-Hold
If an Up or Down button is pressed and held when the Set Temperature is
selected, the temperature will continue to change until the button is released,
or the Temperature range limits are reached.
The Spa Screen
One Press Activation
e Spa Screen shows all available equipment to control, as well as Invert, in
one easy-to-use screen. Each button is xed on a specic function and can be
used as a very simple user interface for the spa. e display shows icons that
are related to the equipment installed on a particular spa model, so this screen
may change depending on the installation.
e pumps have more than one ON state, so the icon will change to reect
the state that the equipment is in. Below are some examples of 2-speed Pump
indicators:
NOTE: e icon for the pump that is associated with the heater (Circ or P1
Low) will have a red glow in the center when the heater is running.
The Spa Screen
The pumps have more than one ON state, so the icon will change to refl ect the state that the equipment is in.
Below are some examples of 2-speed Pump indicators.
Jets HighJets LowJets Off
NOTE: The icon for the pump that is associated with the heater (Circ or P1 Low) will have a red glow in the center when the
heater is running.
One-Press Activation
Ready in Rest Mode
Heating
Spa Equipment
Jets 1
Jets 2
Light
Back
The Spa Screen shows all available equipment to control, as well as Invert, in one easy-to-use screen. Each button is
fixed on a specific fuction and can be used as a very simple user interface for the spa The display shows icons that are
related to the equipment installed on a particular spa model, so this screen may change depending on the installation.
Invert
8:32 PM
104°F
The Spa Screen
The pumps have more than one ON state, so the icon will change to refl ect the state that the equipment is in.
Below are some examples of 2-speed Pump indicators.
Jets HighJets LowJets Off
NOTE: The icon for the pump that is associated with the heater (Circ or P1 Low) will have a red glow in the center when the
heater is running.
One-Press Activation
Ready in Rest Mode
Heating
Spa Equipment
Jets 1
Jets 2
Light
Back
The Spa Screen shows all available equipment to control, as well as Invert, in one easy-to-use screen. Each button is
fixed on a specific fuction and can be used as a very simple user interface for the spa The display shows icons that are
related to the equipment installed on a particular spa model, so this screen may change depending on the installation.
Invert
8:32 PM
104°F
By turning the light on and o, it will change the sequence of colors from
ashing, to fading, to solid color.
Light Operation