Troubleshooting guide

15
Ready-in-Rest Mode
READY/REST appears in the display if the spa is in Rest Mode and the Jets
1 Button is pressed. It is assumed that the spa is being used and will heat to set
temperature. While Pump 1 High can be turned on and o, Pump 1 Low will
run until set temperature is reached, or 1 hour has passed. After 1 hour, the
System will revert to Rest Mode. is mode can also be reset by entering the
Settings Menu and changing the Heat Mode.
Time of Day
Be sure to set the Time-of-Day
Setting the time-of-day is important for determining ltration times and
other background features.“Set Time” will appear on the display if no time-
of-day is set in the memory. On the Settings Screen, select the Time-of-Day
line. On the Time-of-Day screen, simply navigate right and left to select the
Hour, Minutes, AM/PM and 12/24 Hour segments. Use the Up and Down
Buttons to make changes.
Saving Settings
e Time-of-Day screen is a simple, editable screen that illustrates a feature of
the control that applies to all other editable screens as well.
When changes are made, the icon to go “Back” changes to “Save” and a new
icon for “Cancel” appears under the Save icon. Navigating to the left will
highlight the Save icon, and navigating down from there will allow the user to
cancel the pending change. Pressing the “Select” button will save or cancel the
changes and go back to the previous screen.
Time-of-Day
Be sure to set the Time-of-Day
Setting the time-of-day is important for determining fi ltration times and other background features.
“Set Time” will appear on the display if no time-of-day is set in the memory.
On the Settings Screen, select the Time-of-Day line. On the Time-of-Day screen, simply navigate right and left to select the
Hour, Minutes, AM/PM and 12/24 Hour segments. Use the Up and Down Buttons to make changes.
Saving Settings
The Time-of-Day screen is a simple, editable screen that illustrates a feature of the control that applies to all other editable
screens as well.
When changes are made, the icon to go “Back” changes to “Save” and a new icon for “Cancel” appears under the Save icon.
Navigating to the left will highlight the Save icon, and navigating down from there will allow the user to cancel the pend-
ing change. Pressing the “Select” button will save or cancel the changes and go back to the previous screen.
Note:
If power is interrupted to the system, Time-of-Day will be maintained for several days.
Time of Day
Back
12 :00 PM 12 HR
Time of Day
Back
12 :00 PM 12 HR
Cancel
Save
10:05 PM 12 HR
Time-of-Day
Be sure to set the Time-of-Day
Setting the time-of-day is important for determining fi ltration times and other background features.
“Set Time” will appear on the display if no time-of-day is set in the memory.
On the Settings Screen, select the Time-of-Day line. On the Time-of-Day screen, simply navigate right and left to select the
Hour, Minutes, AM/PM and 12/24 Hour segments. Use the Up and Down Buttons to make changes.
Saving Settings
The Time-of-Day screen is a simple, editable screen that illustrates a feature of the control that applies to all other editable
screens as well.
When changes are made, the icon to go “Back” changes to “Save” and a new icon for “Cancel” appears under the Save icon.
Navigating to the left will highlight the Save icon, and navigating down from there will allow the user to cancel the pend-
ing change. Pressing the “Select” button will save or cancel the changes and go back to the previous screen.
Note:
If power is interrupted to the system, Time-of-Day will be maintained for several days.
Time of Day
Back
12 :00 PM 12 HR
Time of Day
Back
12 :00 PM 12 HR
Cancel
Save
10:05 PM 12 HR