Troubleshooting guide

18
Time Display
Change the clock between 12 hr and 24 hr display.
Reminders
Turn the reminder messages (like “Clean Filter”) On or O.
Cleanup
Cleanup Cycle Duration is not always enabled, so it may not appear.
When it is available, set the length of time Pump 1 will run after each use.
0-4 hours are available.
Color
Pressing the Select Button when Color is highlighted will cycle through 5
background colors available in the control.
Language
Change the language displayed on the panel.
System Information
e System Information Menu displays various settings and
identication of the particular system. As each item in the
menu is highlighted, the detail for that item is displayed at
the bottom of the screen.
Software ID (SSID)
Displays the software ID number for the System.
System Model
Displays the Model Number of the
System.
Current Setup
Displays the currently selected
Conguration Setup Number.
Conguration Signature
Displays the checksum for the system
conguration le.
Heater Voltage
Displays the operating voltage congured for the heater.
Heater Type
Displays a heater type ID number.
Dip Switch Settings
Displays a number that represents the DIP switch positions of S1 on the
main circuit board.
Panel Version
Displays a number of the software in the topside control panel.
Information
System Information
The System Information Menu displays various settings and
identifi cation of the particular system. As each item in the
menu is highlighted, the detail for that item is displayed at
the bottom of the screen.
Software ID (SSID)
Displays the software ID number for the System.
System Model
Displays the Model Number of the System.
Current Setup
Displays the currently selected Confi guration Setup Number.
Confi guration Signature
Displays the checksum for the system confi guration fi le.
Heater Voltage
Displays the operating voltage confi gured for the heater.
Heater Type
Displays a heater type ID number.
Dip Switch Settings
Displays a number that represents the DIP switch positions of S1 on the main circuit board.
Panel Version
Displays a number of the software in the topside control panel.
System Information
Back
Software ID (SSID)
System Model
Current Setup
Configuration Signature
Heater Voltage
Heater Type
Software ID (SSID):
M100_101 V0.6
Information
(preferences continued)