Troubleshooting guide

26
Restricting Operations
e control can be restricted to prevent un-
wanted use or temperature adjustments.
Locking the panel prevents the controller
from being used, but all automatic functions
are still active.
Locking the Temperature allows Jets and
other features to be used, but the Set Tem-
perature and other programmed settings
cannot be adjusted.
Temperature Lock allows access to a reduced
selection of menu items. ese include Set
Temperature, FLIP, LOCK, UTIL, INFO
and FALT LOG.
Restricting Operation
LOCK will remain on the display
for 3 seconds and then revert to the normal display.
When the Temperature is locked, the panel will display the Set Temperature
by pressing a Temperature Button, as ususal.
LOCK will appear if an attempt to reset the temperature is made with a subsequent button press.
Adjustable settings in the menus are also locked.
Other function buttons will operate normally.
Panel Locked
Temperature Locked
Any
Button
Press
Locks all function buttons.Locks Temp. and Settings.
SET
SET
SET
SET
READY
RANGE
FLTR1
READY
RANGE
FLTR1
While the Temperature is
still ashing, press menu
repeatedly until LOCK
appears in the LCD.
SET
RANGE
Main Screen
Main Screen
READY
RANGE
FLTR1
Main Screen
READY
RANGE
FLTR1
Main Screen
READY
RANGE
FLTR1
Main Screen
READY
RANGE
FLTR1
READY
RANGE
FLTR1
Main Screen
READY
RANGE
FLTR1
SET
Several Seconds
To next item in
Main Menu
Several
Seconds
Several
Seconds
RANGE
Waiting
Several Seconds
Reverts to Original Setting
To Set
*****
While pressing and holding the UP button
Slowly press and release the menu Button two times.
READY
RANGE
FLTR1
Main Screen
A Few
Seconds
Unlocking
Indicates Flashing or Changing Segment
Key
A temperature button, used for “Action”
menu or dedicated “Choose” button, depending on control panel
conguration
Indicates Alternating or Progressive Message - every 1/2 second
Waiting time that keeps the last change to a menu item.
Waiting time (depends on menu item) that reverts to original setting and
ignores any change to that menu item.
*****
This Unlock sequence may be used from any screen that may be displayed on a restricted panel.
NOTE: If the panel has both an UP and a Down button, the ONLY button that will work in the Unlock Sequence is
the UP button.
The control can be restricted to prevent unwanted use or temperature adjustments.
Locking the panel prevents the controller from being used, but all automatic functions are still active.
Locking the Temperature allows Jets and other features to be used, but the Set Temperature and other programmed settings
cannot be adjusted.
Temperature Lock allows access to a reduced selection of menu items.
These include Set Temperature, FLIP, LOCK, UTIL, INFO and FALT LOG.
is Unlock sequence may be used from any screen that may be displayed on
a restricted panel.
NOTE: If the panel has both an UP and a Down button, the ONLY button
that will work in the Unlock Sequence is the UP button.
Unlocking
Restricting Operation
LOCK will remain on the display
for 3 seconds and then revert to the normal display.
When the Temperature is locked, the panel will display the Set Temperature
by pressing a Temperature Button, as ususal.
LOCK will appear if an attempt to reset the temperature is made with a subsequent button press.
Adjustable settings in the menus are also locked.
Other function buttons will operate normally.
Panel Locked
Temperature Locked
Any
Button
Press
Locks all function buttons.Locks Temp. and Settings.
SET
SET
SET
SET
READY
RANGE
FLTR1
READY
RANGE
FLTR1
While the Temperature is
still ashing, press menu
repeatedly until LOCK
appears in the LCD.
SET
RANGE
Main Screen
Main Screen
READY
RANGE
FLTR1
Main Screen
READY
RANGE
FLTR1
Main Screen
READY
RANGE
FLTR1
Main Screen
READY
RANGE
FLTR1
READY
RANGE
FLTR1
Main Screen
READY
RANGE
FLTR1
SET
Several Seconds
To next item in
Main Menu
Several
Seconds
Several
Seconds
RANGE
Waiting
Several Seconds
Reverts to Original Setting
To Set
*****
While pressing and holding the UP button
Slowly press and release the menu Button two times.
READY
RANGE
FLTR1
Main Screen
A Few
Seconds
Unlocking
Indicates Flashing or Changing Segment
Key
A temperature button, used for “Action”
menu or dedicated “Choose” button, depending on control panel
conguration
Indicates Alternating or Progressive Message - every 1/2 second
Waiting time that keeps the last change to a menu item.
Waiting time (depends on menu item) that reverts to original setting and
ignores any change to that menu item.
*****
This Unlock sequence may be used from any screen that may be displayed on a restricted panel.
NOTE: If the panel has both an UP and a Down button, the ONLY button that will work in the Unlock Sequence is
the UP button.
The control can be restricted to prevent unwanted use or temperature adjustments.
Locking the panel prevents the controller from being used, but all automatic functions are still active.
Locking the Temperature allows Jets and other features to be used, but the Set Temperature and other programmed settings
cannot be adjusted.
Temperature Lock allows access to a reduced selection of menu items.
These include Set Temperature, FLIP, LOCK, UTIL, INFO and FALT LOG.
Main Menus
Main Screen
Menu Button
P
SET
RANGE
SET
While the Temperature is
still ashing, press Menu.
SET
RANGE
READY
RANGE
FLTR1
Main Screen
READY
RANGE
FLTR1
READYSET
1
2
Power-up Screens
Each time the System powers up, a series of numbers is displayed.
After the startup sequence of numbers, the system will enter Priming Mode (See Page 3).
Waiting 30 Seconds in the Main Menu
will allow the display to revert to the Main Screen.
Most changes are not saved unless Menu is pressed.
Refer to Key above.
If Time of Day is not set
“SET TIME” will
appear in this menu.
SET
Indicates Flashing or Changing Segment
Key
A temperature button, used for “Action”
Menu or dedicated “Choose” button, depending on control panel conguration
Indicates Alternating or Progressive Message - every 1/2 second
Waiting time that keeps the last change to a menu item.
Waiting time (depends on menu item) that reverts to original setting and
ignores any change to that menu item.
*****
Navigation
Navigating the entire menu structure is done with 3 buttons on the control panel.
Temperature buttons are indicated by a single button icon.
Warm and Cool can both be uesd to simplify navigation and
programming where a single Temperature icon is shown.
The MENU Button is also used to
choose the various menus and navigate each section. Pressing
the MENU button from the main screen (normal operation) will
enter the menus.
Typical use of the Temperature button(s) allows changing the Set
Temperature while the numbers are fl ashing in the LCD.
Pressing the MENU button while the numbers are fl ashing will also
enter the menus.
The menus can be exited with certain button
presses. Simply waiting for several seconds will also
return the panel to normal operation.
KEY