Troubleshooting guide

34
Interchanging JetPaks- SportX Series
Step 1: Put the spa in “Hold”, this will prevent the pump(s) from activating
(see Control System).
Step 2: Carefully, remove the head rest and SnapCap™ by lifting upwards .
Step 3: Push the JetPak forward until you have enough room to reach the two
PVC water unions and air-line union.
Step 4: Loosen the two PVC unions, pull the manifold out from in between
the two water unions.
Step 5: Disconnect the air line union and remove the JetPak from the JetPod.
Step 6: Exchange JetPak®.
Step 7: Reattach the JetPak by reversing steps.
Step 8: Return spa to normal operation by pressing any button on the control
pad.