Troubleshooting guide

78
Reminder Messages
General maintenance helps
Reminder Messages are suppressed in the default programming, but can be activated by using the PREF Menu. See Page 28.
Press a Temperature button to reset a displayed reminder message.
Appears on a regular schedule, e.g. every 30 days.
Clean the lter media as instructed by the owner's manual. See Filter Maintenance.
Appears every 65 days.
e Ground Fault Circuit Interrupter (GFCI) is an important safety device and must be tested on a regular basis to
verify its reliability.
Every user should be trained to safely test the GFCI associated with the hot tub installation.
A GFCI will have a TEST and RESET button on it that allows a user to verify proper function.
Warning:
If freezing conditions exist, a GFCI should be reset immediately or spa damage could result.
Appears on a regular schedule, e.g. every 90 days.
Change the water in the spa on regular basis to maintain proper chemical balance and sanitary conditions.
Reminder Messages
Appears on a regular schedule, e.g. every 30 days.
Clean the filter media as instructed by the owner's manual. See HOLD on page 6.
Appears every 65 days.
The Ground Fault Circuit Interrupter (GFCI) is an important safety device and must be tested on a regular basis to
verify its reliability.
Every user should be trained to safely test the GFCI associated with the hot tub installation.
A GFCI will have a TEST and RESET button on it that allows a user to verify proper function.
Alternates with temperature or normal display.
Alternates with temperature or normal display.
General maintenance helps.
Reminder Messages are suppressed in the default programming, but can be activated by using the PREF Menu. See Page 11.
Press a Temperature button to reset a displayed reminder message.
Warning:
If freezing conditions exist, a GFCI should be reset immediately or spa damage could result.
Appears on a regular schedule, e.g. every 90 days.
Change the water in the spa on regular basis to maintain proper chemical balance and sanitary conditions.
Appears every 365 days.
Filters should be replaced occasionally to maintain proper spa function and sanitary conditions.
Alternates with temperature or normal display.
Alternates with temperature or normal display.
Reminder Messages
Appears on a regular schedule, e.g. every 30 days.
Clean the filter media as instructed by the owner's manual. See HOLD on page 6.
Appears every 65 days.
The Ground Fault Circuit Interrupter (GFCI) is an important safety device and must be tested on a regular basis to
verify its reliability.
Every user should be trained to safely test the GFCI associated with the hot tub installation.
A GFCI will have a TEST and RESET button on it that allows a user to verify proper function.
Alternates with temperature or normal display.
Alternates with temperature or normal display.
General maintenance helps.
Reminder Messages are suppressed in the default programming, but can be activated by using the PREF Menu. See Page 11.
Press a Temperature button to reset a displayed reminder message.
Warning:
If freezing conditions exist, a GFCI should be reset immediately or spa damage could result.
Appears on a regular schedule, e.g. every 90 days.
Change the water in the spa on regular basis to maintain proper chemical balance and sanitary conditions.
Appears every 365 days.
Filters should be replaced occasionally to maintain proper spa function and sanitary conditions.
Alternates with temperature or normal display.
Alternates with temperature or normal display.
Reminder Messages
Appears on a regular schedule, e.g. every 30 days.
Clean the filter media as instructed by the owner's manual. See HOLD on page 6.
Appears every 65 days.
The Ground Fault Circuit Interrupter (GFCI) is an important safety device and must be tested on a regular basis to
verify its reliability.
Every user should be trained to safely test the GFCI associated with the hot tub installation.
A GFCI will have a TEST and RESET button on it that allows a user to verify proper function.
Alternates with temperature or normal display.
Alternates with temperature or normal display.
General maintenance helps.
Reminder Messages are suppressed in the default programming, but can be activated by using the PREF Menu. See Page 11.
Press a Temperature button to reset a displayed reminder message.
Warning:
If freezing conditions exist, a GFCI should be reset immediately or spa damage could result.
Appears on a regular schedule, e.g. every 90 days.
Change the water in the spa on regular basis to maintain proper chemical balance and sanitary conditions.
Appears every 365 days.
Filters should be replaced occasionally to maintain proper spa function and sanitary conditions.
Alternates with temperature or normal display.
Alternates with temperature or normal display.