User's Manual

Cat
®
S50c Smartphone User Manual 3
Installing a SIM Card
1. Loosen the captive security screw using a coin or flat screw driver.
2. Open the memory/SIM card slot cover.
3. Insert the SIM card as shown.
Note:
• The gold contacts must be facing down on the micro SIM card with the cut off corner on
the top left. Insert the micro SIM card into the slot until you hear a locking sound.
• To remove the micro SIM card, press the SIM card inwards and release quickly and draw
the card out to remove.
• Do not force the SIM card when inserting it into the slot as this could damage the SIM
card or slot. The SIM card will slide smoothly into the slot when inserted in the correct
orientation.
• This device does not support Nano SIM card.
Charging the Battery
The S50c has an embedded battery, to charge the battery do the following:
1. Connect the USB cable that came with your mobile phone to the charger.
Note:
Use only Cat
®
approved chargers and cables. Unapproved equipment may cause damage to
the
device or cause batteries to explode.
2. Open the USB port cover. Connect the USB cable to the USB port of your phone.
Note:
Be careful not to use excessive force when plugging the USB cable.
Be aware of the correct orientation of the plug. Damage can be caused by attempting to
insert the
connector the wrong way, which is not covered by the warranty.
MIL SPEC
FIRST DRAFT REV. 2