Owner's manual
11
OPERATING INSTRUCTIONS
INTERNAL POWER LEVEL SWITCH:
The Rapid Power module has three power settings, Stock, Low Power Level or High Power Level. To select dier-
ent power levels remove the cover of the module box, locate the red internal power switch, and set the switch
to the desired power level per illustrations below.
Be sure to securely fasten the module cover after changing the power level. Make sure the cable exits the box
properly in the hole provided.
1. After completing the installation of the module, turn the tractor on to test if the module is working. If the
tractor starts then the module is working. If the tractor does not start, check all of the connections on the install
to be sure that they are secure and then attempt to start the tractor again.
2. Adjust performance setting to desired level and enjoy.
Warranty
ON
1
2
Both switches in
the “o” position
indicates Stock
performance
First switch in
the “on” position
indicates Low Power
Level.
Second switch in
the “on” Position
indicates High Power
Level.
Both switches in
the “on” Position
indicates High Power
Level.
USB Port
Internal Power Switches
ON
1
2
ON
1
2
ON
1
2
Stock
Low Power Level
External Power Switch Female Plug
(External Switch part number 40610)
High Power Level
These two positions provide the same power.
Operating inStrUCtiOnS