Owner's manual

1. Open the engine compartment or remove the engine cover, make sure that the engine is fully accessible so

that plugs can be reached and the module can be mounted to a safe place within the engine bay.

2. Locate the MAP Sensor plug near the back of

the engine on the right side of the engine and

near the rear of the engine. Reference this map

sensor when following step 3.

3. Locate Map/Boost sensor plugs: The MAP sensor will have a tag on it with the label “Boost,” on it. This is the

spot where the Bully Dog MAP sensor plug set ties into the engine. Unplug the MAP sensor once located.

MAP Sensor

Unplugged MAP Sensor

L R

INSTALLATION