Owner's manual

1
NITROUS KIT
Introduction
The Bully Dog Nitrous Kit allows you to control an
electromechanical solenoid with a GT™ or WatchDog™; it
automatically activates the solenoid if adjustable conditions
like throttle position, rpm and/or speed are met.
Table of Contents
Parts ..................................................................... 1-2
Physical Installation .............................................. 2-4
GT/WatchDog Setup ............................................ 5-6
Menu Blowout ...................................................... 7
Contacting Technical Support.............................. 8
Parts Included
Control Module ....................................................(47020)
Wiring Harness .................................................... (47020-98)
Master Switch ...................................................... (47020-6)
Hook and Loop Fastener ..................................... (40390-94)
Zip ties ................................................................. (1-NYTIE8)
Fuse Tap ............................................................... (PART #)
Tools Needed
• Wire crimper
Up to ve standard wire crimps are also required for
installation; the crimps are not included in the Nitrous Kit.