Owner's manual
6
NITROUS KIT
5. Congure the requirements for solenoid activation
(nitrous burn).
a. Press the button to the left of the setting that you
want to change.
b. Use the buttons on the right
to change the value of the
selected setting.
c. Press Go Back (top left
button) to save the change(s)
and return to the previous
screen.
6. Repeat steps 3-5 to congure additional stages
(if desired).
Go Back
LOWER LIMIT
to Stage Menu
UP
DOWN
Use UP and DOWN arrows
to congure MIN On value
45
MPH
(1 to 90)
Go Back
STAGE 1
to NIT/METH Menu
Parameter: Speed
Lower Limit: 22
Upper Limit: 90
Throttle Position: 90
It is also possible to turn individual solenoids on or o:
7. Choose Solenoid Setup.
8. Highlight the desired solenoid by pressing the button
directly to the left of it.
9. Use the button(s) on the right to switch between ON
and OFF.
10. To save the current settings and return to the previous
screen, press Go Back (top left button).