Service manual

1
INSULATOR
CELL
STRAP
v
i
"
COMPONENT
COIL
ASSEMBLY
CELL COIL
ASSEMBLY
TUNING FORK
ASSEMBLY
FORK SPACER
FINGER
w
Removing tuning fork and
coii assemblies
a. Rotate pawl finger assembly clock-
wise 180
degrees to
clear timing
fork and
pawl
bridge pivot
screw.
b. Remove tuning fork and coil
assemblies (6
screws).
CAUTION: Do not pry at base of
tuning fork. Use
a punch
to
push tongue of tuning
fork through push-oH
hole on dial side.
c Note position of fork spacers.
Colors denote different thicknesses.
Fig. 27
aili
25