Service manual

Replacing tuning fork
and coil
assemblies.
a. Replace toning fork and coil assem-
blies [6 screws).
NOTE: Tuning fork spacers are used
lo center fork tines between
pillar plate and train bridge.
b. Replace
cell strap.
NOTE:
Check that cell strap
is prop-
erly centered
on the insulating
post of coil form before
tight-
ening screw.
c Rotate the pawl
finger assembly
counterclockwise
to bring the pawl
finger adjacent to the lift pin.
Index
and pawl jewels
should
not
engage
the
index wheel at this time.
r
ISOLATOR
CELL
STRAP
INSULATING POST
COL
COIL
TUNING FORK
ASSEMBLY
'FORK
SPACER
COMPONENT.
COIL
ASSEMBLY
Fig. 37
•A,