Certifications 2

Page 4/10
Safety data sheet
according to 1907/2006/EC, Article 31
Printing date 10.1.2020 Revision: 10.1.2020
Version number 112
Trade name: BUNGARD BLACK-OUT SPRAY
(Contd. of page 3)
41.2.25
*
SECTION 7: Handling and storage
·
7.1 Precautions for safe handling
Ensure good ventilation/exhaustion at the workplace.
·
Information about fire - and explosion protection:
Do not spray onto a naked flame or any incandescent material.
Keep ignition sources away - Do not smoke.
Protect against electrostatic charges.
Pressurised container: protect from sunlight and do not expose to temperatures exceeding 50 °C, i.e. electric
lights. Do not pierce or burn, even after use.
·
7.2 Conditions for safe storage, including any incompatibilities
·
Storage:
·
Requirements to be met by storerooms and receptacles:
St
ore in a cool location.
Observe official regulations on storing packagings with pressurised containers.
·
Information about storage in one common storage facility:
Not required.
·
Further information about storage conditions:
Protect from heat and direct sunlight.
·
7.3 Specific end use(s)
No further relevant information available.
*
SECTION 8: Exposure controls/personal protection
·
Additional information about design of technical facilities:
No further data; see item 7.
·
8.1 Control parameters
·
Ingredients with limit values that require monitoring at the workplace:
115-10-6 dimethyl ether
WEL Short-term value: 958 mg/m³, 500 ppm
Long-term value: 766 mg/m³, 400 ppm
1330-20-7 xylene
WEL Short-term value: 441 mg/m³, 100 ppm
Long-term value: 220 mg/m³, 50 ppm
Sk; BMGV
71-36-3 butan-1-ol
WEL Short-term value: 154 mg/m³, 50 ppm
Sk
·
Ingredients with biological limit values:
1330-20-7 xylene
BMGV 650 mmol/mol creatinine
Medium: urine
Sampling time: post shift
Parameter: methyl hippuric acid
·
Additional information:
The lists valid during the making were used as basis.
·
8.2 Exposure controls
·
Personal protective equipment:
·
General
protective and hygienic measures:
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing
Wash hands before breaks and at the end of work.
Do not inhale gases / fumes / aerosols.
Avoid contact with the eyes.
Avoid contact with the eyes and skin.
·
R
espiratory protection:
Not required.
·
Protection of hands:
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
(Contd. on page 5)
GB